This product was not featured by Product Hunt yet. It will not be visible on their landing page and won't be ranked (cannot win product of the day regardless of upvotes).
Product upvotes vs the next 3
Waiting for data. Loading
Product comments vs the next 3
Waiting for data. Loading
Product upvote speed vs the next 3
Waiting for data. Loading
Product upvotes and comments
Waiting for data. Loading
Product vs the next 3
Loading
SpinSlicer
Open-source slicer for volumetric (CAL) 3D printers
Volumetric printers cure a whole part at once in a spinning vial of resin. SpinSlicer turns an STL into the projector frames: it models refraction, absorption and projector optics, shows a virtual print, and plays the frames. Free, MIT, Windows and Linux.
Hi Product Hunt! I'm one of the two makers of SpinSlicer.
Volumetric printing (CAL) still feels like magic to me: a vial of resin turns in front of a projector, and a whole part appears at once, with no layers and no supports. The catch is the software. The frames the projector shows have to be computed, and the existing tools are mostly research code. So we built a desktop app that anyone building a CAL printer can use.
What it does:
STL in, optimized projector frames out (MP4 or PNG)
Models refraction through the vial, resin absorption and the projector's ray cone
Virtual print: shows what will actually cure before you spend resin
Plays the frames on the projector in sync with the clock, and stops by itself when the dose is reached
Honest status: everything is checked in simulation. In our benchmark on 3DBenchy, our engine FastCAL matched the model better than OSMO, PM and BCLP (IoU 0.967 vs 0.934, 0.930 and 0.920) and planned about 3x faster than OSMO on the same CPU. But we haven't made a live print from SpinSlicer frames yet; our rig is still being built.
If you have a CAL / volumetric printer, we'd love for you to try it and tell us what breaks. Feedback on the interface is very welcome too. It's free and MIT-licensed, for Windows and Linux.
About SpinSlicer on Product Hunt
“Open-source slicer for volumetric (CAL) 3D printers”
SpinSlicer was submitted on Product Hunt and earned 0 upvotes and 1 comments, placing #215 on the daily leaderboard. Volumetric printers cure a whole part at once in a spinning vial of resin. SpinSlicer turns an STL into the projector frames: it models refraction, absorption and projector optics, shows a virtual print, and plays the frames. Free, MIT, Windows and Linux.
On the analytics side, SpinSlicer competes within Open Source, 3D Printer, GitHub and Maker Tools — topics that collectively have 122.6k followers on Product Hunt. The dashboard above tracks how SpinSlicer performed against the three products that launched closest to it on the same day.
Who hunted SpinSlicer?
SpinSlicer was hunted by RedBlueCarrot. A “hunter” on Product Hunt is the community member who submits a product to the platform — uploading the images, the link, and tagging the makers behind it. Hunters typically write the first comment explaining why a product is worth attention, and their followers are notified the moment they post. Around 79% of featured launches on Product Hunt are self-hunted by their makers, but a well-known hunter still acts as a signal of quality to the rest of the community. See the full all-time top hunters leaderboard to discover who is shaping the Product Hunt ecosystem.
For a complete overview of SpinSlicer including community comment highlights and product details, visit the product overview.
Hi Product Hunt! I'm one of the two makers of SpinSlicer.
Volumetric printing (CAL) still feels like magic to me: a vial of resin turns in front of a projector, and a whole part appears at once, with no layers and no supports. The catch is the software. The frames the projector shows have to be computed, and the existing tools are mostly research code. So we built a desktop app that anyone building a CAL printer can use.
What it does:
STL in, optimized projector frames out (MP4 or PNG)
Models refraction through the vial, resin absorption and the projector's ray cone
Virtual print: shows what will actually cure before you spend resin
Plays the frames on the projector in sync with the clock, and stops by itself when the dose is reached
Honest status: everything is checked in simulation. In our benchmark on 3DBenchy, our engine FastCAL matched the model better than OSMO, PM and BCLP (IoU 0.967 vs 0.934, 0.930 and 0.920) and planned about 3x faster than OSMO on the same CPU. But we haven't made a live print from SpinSlicer frames yet; our rig is still being built.
If you have a CAL / volumetric printer, we'd love for you to try it and tell us what breaks. Feedback on the interface is very welcome too. It's free and MIT-licensed, for Windows and Linux.